Quad 909 Amplifier
The 909 Stereo Power Amplifier incorporates Quad's patented current dumping technology and is one of the finest audio amplifiers available today.

The current dumping technique eliminates many of the problems associated with transistor amplifiers giving a consistent and predictable performance without a need for the fine tuning adjustments on the production line.

In current dumping amplifiers there is a very high quality low power output amplifier whose performance is not critical. This high power output amplifier controls the loudspeaker at all times and provides the current or 'muscle' to generate the sound. The low power output amplifier is arranged to generate a signal that compensates for errors between the input signal, and the signal fed to the loudspeaker. The end result is that the quality and accuracy of the output signal depends only the performance of the low power amplifier. In the Quad 909 this low power output amplifier has been engineered to the highest standards.

The problems of crossover distortion; quiescent current adjustment; thermal tracking and transistor matching all disappear. If such a things as a perfect amplifier were to exist, then the Quad 909 would be very close to that perfection.


Specifications

909 Stereo Power Amplifier
Maximum Power Output 140 watts RMS into 8 ohms (0.5% THD)
250 watts RMS into 4 ohms (0.5% THD)
Total Harmonic Distortion
(100 watts into 8 ohms)
(20 Hz to 20 kHz)
<0.02%
Input Sensitivity ( Phono Input ) 775 mV
Output Impedance 1.5 uH in parallel with 0.05 ohms
DC offset voltage Less than 10 mV
Frequency Response 13 Hz to 40 kHz + 0dB/-1dB
Crosstalk at 1 kHz -90 dB at 1 kHz
Signal - to - Noise Ratio ref. 140 watts >108 dB ( 20 Hz to 20 kHz )
Dimensions ( H x W x D ) 140 mm × 321 mm × 240 mm